Contact
Cum să cumpăr
Livrare
Consilier de cumpărături
MONITORING AND CONTROLLING OF SUBSTATION USING ZIGBEE TECHNOLOGY
engleză
95 b
Până la 30 de zile pentru returnare
Clienții au cumpărat de asemenea
/
Carte broșată
71.50
lei
/
Carte broșată
90.87
lei
This book proposes an innovative design to develop a system to monitor and control various electrical loads from the substation. The design generally consists of two units, one in the substation unit called transmitter unit, and another one is the Main station called as controlling or receiving unit. The transmitter unit is where the power is monitored continuously by Arduino microcontroller. Zigbee is used for transmitting the signals that are obtained. The controlling unit or receiver unit in the main station receives the transmitted signals by means of the zigbee receiver and displays in the laptop and reacts in accordance to the received signal. The ultimate objective is to monitor the electrical parameters continuously and hence to guard the burning of the equipments in the station due to the constraints such as overload, over temperature and input high voltages. If any of these values increases beyond the limit then the entire unit is shut down by the designed controlling unit.
Informații despre carte
engleză
Dăruiește această carte chiar astăzi
Este foarte ușor
1 Adaugă cartea în coș și selectează Livrează ca un cadou 2 Îți vom trimite un voucher în schimb 3 Cartea va ajunge direct la adresa destinataruluiAr putea de asemenea, să te intereseze
/
Carte broșată
198.09
lei
Bună ziua! Sunt Libroamiko, consilierul dumneavoastră de cărți.
Cu ce vă pot ajuta?