Contact
Cum să cumpăr
Livrare
Consilier de cumpărături
Characterizing Defects In Metals Using PALS
Characterizing Defects in Steel, Aluminum and Copper by way of Positron Annihilation Lifetime Spectroscopy
engleză
121 b
30 de zile pentru retur bunuri
Clienții au cumpărat de asemenea
/
Carte broșată
483.72
lei
Machines with moving parts develop wear and tear after some time of operation. Sometimes defects are on the surface, and thus are visible with the naked eye or with a microscope. However, some defects are seated below the surface and are unnoticeable by the human eye or by a microscope. One way of probing materials for these defects is by way of Positron Annihilation Lifetime Spectroscopy (PALS). This sensitive technique was applied to characterize atomic-scale defects in aluminum and copper samples, as well as steel bearing raceways of different levels of usage. Measurements on aluminum and copper were performed before and after annealing near the melting point. Results show that average positron lifetime decreases significantly after annealing. Then steel bearing raceways were subjected to PALS measurements before and after mechanical testing. Results show an average increase in the positron lifetime of tested bearings as compared to the as-fabricated bearing.
Informații despre carte
engleză
Dăruiește această carte chiar astăzi
Este foarte ușor
1 Adaugă cartea în coș și selectează Livrează ca un cadou 2 Îți vom trimite un voucher în schimb 3 Cartea va ajunge direct la adresa destinataruluiAr putea de asemenea, să te intereseze
/
Carte broșată
291.67
lei
/
Carte broșată
73.19
lei
/
Carte broșată
67.99
lei
/
Copertă tare
994.60
lei
/
Carte broșată
52.81
lei
Bună ziua! Sunt Libroamiko, consilierul dumneavoastră de cărți.
Cu ce vă pot ajuta?